Easy to Follow Step-by-step Key fob remote Programming Instructions
2018 Ford EcoSport
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2018 Ford EcoSport
FORD LINCOLN MERCURY REMOTE HEAD KEY FOB (KEY BLADE/CHIP PROGRAMMING)
STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS
Minutes 5 minutes
-
Enter Vehicle Programming Mode – Step 1
INSERT a working transponder chip key into the ignition cylinder.
-
Confirm First Transponder Chip Key
TURN the ignition cylinder to ON (position 3) for 5 seconds and then back to OFF (position 1).
-
Enter Vehicle Programming Mode – Step 2
REMOVE the first working transponder chip key and INSERT a second working transponder chip key.
-
Confirm Second Transponder Chip Key
TURN the ignition cylinder to ON (position 3) for 5 seconds and then back to OFF (position 1).
-
Activate Un-Programmed Transponder Key – Step 1
REMOVE the second working transponder chip key and INSERT the un-programmed transponder chip key for activation within 20 seconds.
-
Activate Un-Programmed Transponder Key – Step 2
TURN the ignition cylinder to ON (position 3) for 6 seconds and then back to OFF (position 1).
-
Exit Programming Mode
The theft indicator light will respond by lighting up for 3 seconds to indicate successful programming of the new transponder chip key and an exit of programming mode.
-
Test Remotes
Test all remotes. Programming is now complete.
-
Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Supply:
- Key Fob Remote(s) that you want to program to your vehicle.
Tools:
- None
FORD LINCOLN MERCURY REMOTE HEAD KEY FOB (REMOTE PROGRAMMING)
STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS
Minutes 5 minutes
-
Enter Vehicle Programming Mode
TURN Ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode.
-
Program Remote
WITHIN 20 seconds PRESS ANY button on first keyless remote fob. Door locks will cycle to confirm programming.
-
Exit Programming Mode
TURN ignition to OFF. Locks will again cycle to indicate end of programming mode.
-
Test Remotes
TEST all remotes. Programming is complete.
-
Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Supply:
- Key Fob Remote(s) that you want to program to your vehicle.
Tools:
- None
Important:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Transponder Chip Key Programming
- You must have 2 working transponder chip keys in order to program a new transponder without the assistance of a professional.
- The key to be programmed must be cut prior to beginning this programming procedure.
- Key Fob Remote Programming
- Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
- You may clear your keyless entry system memory by entering programming mode as shown in the steps above.
Note: If your vehicle cannot enter programming mode, then you cannot program any remote. This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2018 Ford EcoSport
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
I couldn’t program can someone help phone #Please