Easy to Follow Step-by-step Key fob remote Programming Instructions
1993 Mitsubishi Galant
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 1993 Mitsubishi Galant
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Enter Programming Mode – Step 1
LOCATE the keyless entry receiver module. The module will be a black box approximately 7”x4”x2” with wires leading to it.
- Enter Programming Mode – Step 2
LOCATE the programming connector attached to the keyless entry receiver module. It’s a white plastic connector with 2 wires and 2 terminals that are NOT plugged in to anything.
- Enter Programming Mode – Step 3
AFTER locating the programming connector, JUMP the 2 metal terminals inside the plug with a suitable groundwire (paperclip). The vehicle will respond by automatically cycling the vehicle’s locks LOCK/UNLOCK and beeping the horn to indicate successful entry into Programming Mode.
- Program First Remote
PRESS the LOCK button on the first remote to be programmed. The vehicle will respond by automatically cycling the vehicle’s locks LOCK/UNLOCK and beeping the horn to indicate successful programming of that remote.
- Program Additional Remote(s)
REPEAT Step 4 for any additional remotes to be programmed to the vehicle.
- Exit Programming Mode
REMOVE jumper wire to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- IMPORTANT: CONFIRM location of the keyless remote entry (RKE) receiver module in your Owner’s Manual. Diamante location: in the vicinity of the glove box. Galant location: attached to the blower motor above the glove box. Eclipse/Montero location: behind the panel located underneath the steering wheel (you will need to remove the panel).
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Prepare Vehicle
OPEN the Driver’s door.
- Enter Programming Mode – Step 1
INSERT the key into the Ignition and TURN to the ON position (just shy of cranking the engine)
- Enter Programming Mode – Step 2
PRESS and HOLD the PROGRAMMING/OVERRIDE Button (located under the Driver’s side dashboard). WITHIN 20 seconds the vehicle will cycle the door locks LOCK.UNLOCK and the horn will sound 3 times to indicate the vehicle has successfully entered Programming Mode. DO NOT release the PROGRAMMING/OVERRIDE Button.
- Program Remote
PRESS the #1 Button (top left) on the first remote. The vehicle will respond by cycling the door locks LOCK/UNLOCK and the horn will sound 1 time to indicate successful programming of the remote.
- Program Additional Remote(s)
REPEAT Step 4 to program any additional remotes to your vehicle.
- Exit Programming Mode
RELEASE the PROGRAMMING/OVERRIDE Button and TURN the Ignition to OFF to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MAY program up to 4 remotes to your vehicle.
- IMPORTANT: CONFIRM location of the keyless remote entry (RKE) receiver module in your Owner’s Manual. Diamante location: in the vicinity of the glove box. Galant location: attached to the blower motor above the glove box. Eclipse/Montero location: behind the panel located underneath the steering wheel (you will need to remove the panel).
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
1993 Mitsubishi Galant
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.