Easy to Follow Step-by-step Key fob remote Programming Instructions
1999 Mitsubishi Eclipse Spyder
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 1999 Mitsubishi Eclipse Spyder
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Prepare Vehicle
OPEN the Driver’s door.
- Enter Programming Mode – Step 1
INSERT the key into the Ignition and TURN to the ON position (just shy of cranking the engine)
- Enter Programming Mode – Step 2
PRESS and HOLD the PROGRAMMING/OVERRIDE Button (located under the Driver’s side dashboard). WITHIN 20 seconds the vehicle will cycle the door locks LOCK.UNLOCK and the horn will sound 3 times to indicate the vehicle has successfully entered Programming Mode. DO NOT release the PROGRAMMING/OVERRIDE Button.
- Program Remote
PRESS the #1 Button (top left) on the first remote. The vehicle will respond by cycling the door locks LOCK/UNLOCK and the horn will sound 1 time to indicate successful programming of the remote.
- Program Additional Remote(s)
REPEAT Step 4 to program any additional remotes to your vehicle.
- Exit Programming Mode
RELEASE the PROGRAMMING/OVERRIDE Button and TURN the Ignition to OFF to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MAY program up to 4 remotes to your vehicle.
- IMPORTANT: CONFIRM location of the keyless remote entry (RKE) receiver module in your Owner’s Manual. Diamante location: in the vicinity of the glove box. Galant location: attached to the blower motor above the glove box. Eclipse/Montero location: behind the panel located underneath the steering wheel (you will need to remove the panel).
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Enter Programming Mode – Step 1
LOCATE the Data Link Connector (DLC) pictured below. It will be located underneath the dashboard/steering column on the Driver’s side.
- Enter Programming Mode – Step 2
IDENTIFY DLC Ports 1 and 4 from the diagram shown. NOTICE the metal contacts inside both Ports 1 and 4.
- Enter Programming Mode – Step 3
INSERT key into the Ignition and leave it in the OFF position.
- Enter Programming Mode – Step 4
JUMP Ports 1 and 4 with a suitable jumper wire. Any metal wire (paper clip) will do. Ensure constant contact between both metal contacts and the jumper wire at ALL times throughout this procedure.
- Enter Programming Mode – Step 5
WITHIN 10 seconds, TURN the Ignition switch to ACC (back toward you) then back to OFF (where you can remove the key). The door locks will cycle LOCK/UNLOCK once indicating successful entry into Programming Mode.
- Program Remote
PRESS the LOCK or UNLOCK button on the first remote to be programmed 3 times within 10 seconds. The door locks will cycle LOCK/UNLOCK once indicating successful programming of that remote.
- Program Additional Remote(s)
REPEAT Step 6 for any additional remotes to be programmed WITHIN 1 minute.
- Exit Programming Mode
REMOVE the jumper wire connected to the Data Link Port to finalize programming and EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
1999 Mitsubishi Eclipse Spyder
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.