Easy to Follow Step-by-step Key fob remote Programming Instructions
1993 Buick Riviera
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 1993 Buick Riviera
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Insert Key into Ignition
INSERT key into the Ignition and TURN to the ON position (just shy of cranking the engine).
- Locate Programming Connector
OPEN the Trunk and LOCATE the VAC Programming Connector by the Driver’s side wheel well. Connector may be behind the trim or carpet and will not be connected to anything. The connector will be GREEN and have a black and white wire connected to it.
- Ground Programming Connector
JUMP the terminal to an unpainted ground metal using a suitable ground wire (paperclip). LEAVE the jumper wire connected throughout the procedure. Once connected, the vehicle will respond by cycling door locks LOCK / UNLOCK to indicate that the vehicle has successfully entered Programming Mode.
- Program Remote
PRESS the UNLOCK button on the first remote to be programmed. The vehicle will respond by cycling the door locks LOCK / UNLOCK to signal successful programming of the remote.
- Program Additional Remotes
REPEAT Step 4 for any additional remotes to be programmed, including working ones.
- Exit Programming Mode
REMOVE the jumper wire to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
- You may clear your keyless entry system memory by entering programming mode as shown in the steps above.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
1993 Buick Riviera
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.