2018 Ford Explorer Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2018 Ford Explorer

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2018 Ford Explorer


FORD LINCOLN SMART PROXIMITY KEY FOB REMOTES
STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Confirm First Programmed Smart Key – Step 1

    PLACE the first programmed smart key in the backup slot in the center console.

    The key ring MUST be at the top with the buttons facing towards the FRONT of the vehicle.

  2. Confirm First Programmed Smart Key – Step 2

    PRESS the START/STOP button on the vehicle.

  3. Confirm First Programmed Smart Key – Step 3

    WAIT 5 seconds and PRESS the START/STOP button on the vehicle AGAIN.

  4. Confirm First Programmed Smart Key – Step 4

    REMOVE the first programmed key from the center console.

  5. Confirm Second Programmed Smart Key – Step 1

    Within 10 seconds, PLACE the second programmed smart key in the backup slot in the center console.

  6. Confirm Second Programmed Smart Key – Step 2

    PRESS the START/STOP button on the vehicle.

  7. Confirm Second Programmed Smart Key – Step 3

    WAIT 5 seconds and PRESS the START/STOP button on the vehicle AGAIN.

  8. Confirm Second Programmed Smart Key – Step 4

    REMOVE the second programmed key from the center console.

  9. Program New Smart Key – Step 1

    WAIT 5 seconds and PLACE the NEW un-programmed smart key in the backup slot in the center console.

  10. Program New Smart Key – Step 2

    PRESS the START/STOP button on the vehicle.

  11. Program New Smart Key – Step 3

    WAIT 5 seconds and PRESS the START/STOP button on the vehicle AGAIN.

  12. Test Remotes

    TEST all remotes. Programming is complete.

  13. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Important:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • You MUST have 2 working smart keys (keys that start your vehicle) in order to perform this programming procedure without the assistance of a professional.
  • A MAXIMUM of 4 smart keys can be programmed to your vehicle. If you’ve had 4 programmed in the past, seek the assistance of a professional programmer.
  • Ensure that the vehicle is OFF prior to beginning this procedure. CLOSE all doors prior to beginning this procedure.
  • You MUST perform ALL steps within 30 seconds of starting the programming procedure.
  • You MUST wait 60 seconds before repeating the procedure after an unsuccessful attempt.

Note: If your vehicle cannot enter programming mode, then you cannot program any remote.  This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.


If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2018 Ford Explorer

OEM - New/Used
OEM - New/Used
OEM - New/Used
OEM - New/Used
OEM - New/Used
OEM - New/Used
OEM - New/Used
OEM - New/Used
OEM Electronic
OEM Electronic
OEM Electronic
OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *