Easy to Follow Step-by-step Key fob remote Programming Instructions
2006 Dodge Grand Caravan
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2006 Dodge Grand Caravan
Time needed: 5 minutes.
REMOTE HEAD KEY FOB
Step-By-Step How To Programming Instructions
- Insert First Programmed Key
INSERT a working remote head key into the Ignition and TURN it to the ON/RUN position.
- Remove First Programmed Key
WITHIN 3-15 seconds, TURN the Ignition back to the OFF/LOCK position and REMOVE the key.
- Insert Second Programmed Key
INSERT a second working remote head key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle will chime to indicate successful entry into Programming Mode.
- Remove Second Programmed Key
TURN the second working remote head key to the OFF/LOCK position and REMOVE it from the Ignition.
- Program Remote
INSERT the NEW remote head key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle security light will STOP flashing. It will FLASH again to indicate successful programming of this remote head key.
- Program Additional Remote
REPEAT Step 5 to program any additional remotes to your vehicle.
- Exit Programming Mode
TURN Ignition to OFF/LOCK and REMOVE key to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MUST have at least TWO working remote head keys in order for this procedure to work.
- If you don’t have at least TWO working remote head keys, you MUST have the remote programmed by an Automotive Locksmith.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2006 Dodge Grand Caravan
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
I have one key with the remote on it and I have one key that works the ignition the door but no remote on it and I’d like to have another remote I’ve programmed keys for it before without the remote how do I program it with the remote having two keys without the remote at work and one with the remote can I program another remote
Hello Jack, did you ever get an answer for your question? I’m having issues getting new remote key fobs to program to the remote entry. I have one working remote key fob, had one locksmith come to program another and he was only able to get the key to work in the door and ignition. So at least my wife has a key to start and drive our New/Used 2006 van. I ordered two new 6 button key fobs from eBay and when they arrived took them to a different locksmith. He tried all sorts of stuff including resetting the keys in the vehicle memory. Basically erasing all the keys. He then reprogrammed the original key along with the one for my wife with the non working keyless entry. He cut the two new 6 button key fobs and got them programmed to the ignition, however again just like the first locksmith no luck with the remote entry part of the key fobs. Hence why he erased all keys because he was worried we had exceeded the maximum number of keys allowed to be programmed to the vehicle. Still no joy with any of the 3 new key fobs. He then brought out his frequency tester and that’s when we found out the other non working key fobs were not on the correct frequency. I went home after leaving more money for his time, and checked with the seller of the new key fobs and they supposedly were compatible with my vehicle. The locksmith showed me the frequency printed on the back of original key fob and told me to order from Amazon and make sure that the new key fobs were compatible with my original. So that’s what I did. They just arrived and now I’m trying to get ahold of the locksmith to get these hopefully programmed… Good luck and I hope you have already got your problem fixed.