2005 Mazda 6 Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2005 Mazda 6

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2005 Mazda 6


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Prepare Vehicle – Step 1

    REMOVE key from Ignition.

  2. Prepare Vehicle – Step 2

    CLOSE ALL doors.

  3. Prepare Vehicle – Step 3

    OPEN Driver’s side door and LEAVE OPEN.

  4. Enter Programming Mode – Step 1

    REPEAT the following steps 3 times:

    a. INSERT key into Ignition and TURN to the ON position (just shy of cranking) and back to the OFF position. 

    b. REMOVE key from Ignition.

  5. Enter Programming Mode – Step 2

    CLOSE and OPEN Driver’s door 3 times.

  6. Enter Programming Mode – Step 3

    Vehicle will cycle door locks LOCK/UNLOCK signaling that the vehicle has successfully entered Programming Mode.

  7. Program Remote

    PRESS ANY button on the first remote to be programmed 2 times. Vehicle will cycle door locks LOCK/UNLOCK signaling that the remote has been successfully programmed.

  8. Program Additional Remotes

    REPEAT Step 7 for ALL remotes you want to use with your vehicle.

  9. Exit Programming Mode

    PRESS ANY button AGAIN on the last remote that was programmed to EXIT Programming Mode.

  10. Finalize Programming

    WAIT 15 seconds for the vehicle to cycle locks LOCK/UNLOCK indicating finalization of programming procedure.

  11. Test Remotes

    TEST all remotes. Programming is now complete.

  12. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You may program up to 3 remotes to your vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2005 Mazda 6

OEM Electronic
OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *