2001 Mazda 626 Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2001 Mazda 626

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2001 Mazda 626


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Prepare Vehicle – Step 1

    REMOVE key from Ignition.

  2. Prepare Vehicle – Step 2

    CLOSE ALL doors.

  3. Prepare Vehicle – Step 3

    OPEN Driver’s side door and LEAVE OPEN.

  4. Enter Programming Mode – Step 1

    WITHIN 24 seconds, PERFORM the following steps:

    a. INSERT key into Ignition. 

    b. TURN to the ON position (just shy of cranking) and back to the OFF position.

    c. TURN to the ON position (just shy of cranking) and back to the OFF position.

    d. TURN to the ON position (just shy of cranking) and back to the OFF position.

    e. REMOVE key from Ignition.

  5. Enter Programming Mode – Step 2

    PRESS Driver Door Frame Button 3 times (this is a black rubber button located on the door frame that tells the vehicle whether the door is closed).

  6. Enter Programming Mode – Step 3

    Vehicle will CHIME or door locks will cycle LOCK/UNLOCK signaling that the vehicle has successfully entered Programming Mode.

  7. Program Remote

    PRESS ANY button on the first remote to be programmed 2 times. Vehicle will CHIME signaling that the remote has been successfully programmed.

  8. Program Additional Remotes

    REPEAT Step 7 for ALL remotes you want to use with your vehicle. If you only have 1 remote, REPEAT Step 7 2 additional times. If you have 2 remotes, REPEAT Step 7 with the 2nd remote 2 times.

  9. Exit Programming Mode

    PRESS Driver Door Frame Button AGAIN to EXIT Programming Mode.

  10. Finalize Programming

    WAIT 15 seconds for the vehicle to CHIME 2 times indicating finalization of programming procedure.

  11. Test Remotes

    TEST all remotes. Programming is now complete.

  12. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You may program up to 3 remotes to your vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2001 Mazda 626

OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *