2010 Chrysler Town & Country Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2010 Chrysler Town & Country

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2010 Chrysler Town & Country


Time needed: 5 minutes.


FOBIK KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Insert First Programmed FOBIK

    INSERT the first working FOBIK remote key into the Ignition and TURN it to the ON/RUN position.

  2. Remove First Programmed FOBIK

    WITHIN 3-15 seconds, TURN the Ignition back to the OFF/LOCK position and REMOVE the key.

  3. Insert Second Programmed FOBIK

    INSERT the second working FOBIK remote key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle will chime to indicate successful entry into Programming Mode.

  4. Remove Second Programmed FOBIK

    TURN the second working FOBIK remote key to the OFF/LOCK position and REMOVE it from the Ignition.

  5. Program FOBIK Remote

    INSERT the new FOBIK remote key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the Immobilizer Warning Lamp will FLASH to indicate successful programming of this FOBIK remote key.

  6. Exit Programming Mode

    TURN Ignition to OFF/LOCK and REMOVE FOBIK to Finalize programming of the remote and EXIT Programming Mode.

  7. Program Additional Remote

    REPEAT Steps 5-6 to program any additional remotes to your vehicle.

  8. Test Remotes

    TEST all remotes. Programming is complete.

  9. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You MUST have at least TWO working remote head keys in order for this procedure to work.
  • If you don’t have at least TWO working remote head keys, you MUST have the remote programmed by an Automotive Locksmith.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2010 Chrysler Town & Country

OEM Electronic
OEM Electronic
OEM - New/Used
OEM Electronic
Discontinued
OEM Electronic
Discontinued
OEM Electronic
Discontinued
OEM Electronic
OEM - New/Used
OEM - New/Used
OEM Electronic
Discontinued
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

11 thoughts on “2010 Chrysler Town & Country Keyless Entry Remote Fob Programming Instructions

  1. Kimberly Sanchez says:

    What if, after inserting the two working keys, it never goes into program mode? I have a 2010 Chrysler town and country. (I followed the instructions to a tee)

    • Stephen M says:

      I am having the same problem. Followed instructions to a tee. The vehicle is not going into programming mode. Chrysler did change out the ignition switch a while ago as part of a recall. Could that have affected it?

  2. Ahmed Abdi says:

    Hi I lost my original keyforb for 2010 town and country I got a new one with me now how do I program the new keyforb with out any other key please help

  3. Jean Pierre Crousillat says:

    I want purchase for a remote control key for 2010 town and country but I have only one key that works but the remote control didn’t work
    I want know if I only need the remote control without key and if with only one remote control I can program
    If I can’t program the new remote with one key, you can program? Which is the cost of that service?
    I’m in North Arlington NJ where I can go to buy the key and do the program of the remote control?

  4. Steven Bechler says:

    I have the same problem, I just got my recall done last week and tried to program an extra key tonight and wouldn’t work at all.

Leave a Reply

Your email address will not be published. Required fields are marked *