Easy to Follow Step-by-step Key fob remote Programming Instructions
2010 Chrysler 300
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2010 Chrysler 300
Time needed: 5 minutes.
FOBIK KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Insert First Programmed FOBIK
INSERT the first working FOBIK remote key into the Ignition and TURN it to the ON/RUN position.
- Remove First Programmed FOBIK
WITHIN 3-15 seconds, TURN the Ignition back to the OFF/LOCK position and REMOVE the key.
- Insert Second Programmed FOBIK
INSERT the second working FOBIK remote key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle will chime to indicate successful entry into Programming Mode.
- Remove Second Programmed FOBIK
TURN the second working FOBIK remote key to the OFF/LOCK position and REMOVE it from the Ignition.
- Program FOBIK Remote
INSERT the new FOBIK remote key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the Immobilizer Warning Lamp will FLASH to indicate successful programming of this FOBIK remote key.
- Exit Programming Mode
TURN Ignition to OFF/LOCK and REMOVE FOBIK to Finalize programming of the remote and EXIT Programming Mode.
- Program Additional Remote
REPEAT Steps 5-6 to program any additional remotes to your vehicle.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MUST have at least TWO working remote head keys in order for this procedure to work.
- If you don’t have at least TWO working remote head keys, you MUST have the remote programmed by an Automotive Locksmith.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2010 Chrysler 300
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
What if I only have one working key fob to the vehicle?
Hi Nickolas,
Thanks for reaching out. With only one working fob, you will need the help of a professional.
Take care!
NorthCoast Support
I only have one key fob that works? Why would i need to take it to a dealership or locksmith to have it programmed? In the steps would my old key fob be memory be erased or something making it useless?
I believe this is to reset a memory on your computer but your computer holds up to 8 keys so if there’s not 8 keys programmed then there’s a another way just to program your key without resetting your computer
Replaced car battery..and then we replaced batteries in the fobs .. my car acts like we are stealing it.. do I have to reprogram my fobs? Please help.. Thank you.. Lori
I have 2 keys (not key fobs) and trying this method did not work do you have to have 2 key fobs?
I purchased Fob off you guys, I understand if I had 2 working Fob I could program the 3rd 1 myself. That’s for a 2010 Chrysler 300 limited. Does that sound correct?
My Chrysler 300 2010 key doesn’t work even I put battery in it!! The key is finished. Do I buy a new key and programming box? Or just a key?
After inserting second fobex key chime does not sound and will not give me entry into the computer to program new keys.