2002 Subaru Legacy Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2002 Subaru Legacy

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2002 Subaru Legacy


Subaru Key Fob Remote Step-By-Step How To Programming Instructions

Minutes 5 minutes

  1. Enter Programming Mode – Step 1

    CLOSE ALL doors, UNLOCK ALL doors, PUSH your foot on the brake pedal.

  2. Enter Programming Mode – Step 2

    INSERT key into the Ignition and TURN to the ON position and back to OFF.

  3. Enter Programming Mode – Step 3

    REPEAT this step 9 times (total of 10 times) UNTIL the vehicle’s horn goes off 1 time.

  4. Enter Programming Mode – Step 4

    OPEN and CLOSE Driver’s door.

  5. Program Remote(s)

    PRESS the LOCK button on the remote to be programmed 1 time. Horn will go off indicating successful programming.

  6. Program Additional Remote(s)

    REPEAT Steps 4-5 to program any additional remotes to the vehicle.

  7. Exit Programming Mode

    REMOVE key from Ignition and the vehicle should respond by honking the horn 3 times to signal EXIT from Programming Mode.

  8. Test Remote(s)

    TEST all remotes. Programming is now complete.

  9. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • Alternatives:
    • For some Subaru models, you do NOT need to put your foot on the brake pedal.
    • For some Subaru models, you will need to complete MORE than 10 ON/OFF turns to enter Programming Mode. Just keep going until the horn goes off indicating successful entry into Programming Mode.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2002 Subaru Legacy

OEM - New/Used
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *