2000 Isuzu Trooper Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2000 Isuzu Trooper

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2000 Isuzu Trooper


HONDA KEY FOB REMOTES STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Prepare Vehicle

    OPEN Driver’s door.

  2. Enter Programming Mode – Step 1

    INSERT key into the Ignition.

  3. Enter Programming Mode – Step 2

    TURN the Ignition to ACC and then to the LOCK position 3 times within 3 seconds.

  4. Enter Programming Mode – Step 3

    Within 10 seconds, CLOSE and OPEN the Driver’s door 2 times.

  5. Enter Programming Mode – Step 4

    TURN the Ignition to ACC and then to the LOCK position 3 times within 3 seconds.

  6. Enter Programming Mode – Step 5

    Within 10 seconds, CLOSE and OPEN the Driver’s door once. The vehicle will respond by cycling the locks indicating that the vehicle has successfully entered Programming Mode.

  7. Program Remote(s) – Step 1

    Within 20 seconds, PRESS the LOCK Button on the remote to be programmed. The vehicle will respond by cycling the locks LOCK/UNLOCK.

  8. Program Remote(s) – Step 2

    Within 20 seconds, PRESS the UNLOCK Button on the remote to be programmed. The vehicle will respond by cycling the locks LOCK/UNLOCK signalling successful programming of the remote.

  9. Program Additional Remote(s)

    REPEAT Steps 7 and 8 for each additional remote to be programmed to the vehicle.

  10. Exit Programming Mode

    REMOVE the key from the Ignition to EXIT Programming Mode.

  11. Test Remote(s)

    EXIT vehicle, CLOSE doors and TEST all remotes. Programming is now complete.

  12. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2000 Isuzu Trooper

OEM - New/Used
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *