Easy to Follow Step-by-step Key fob remote Programming Instructions
1999 Chevrolet Silverado (1500, 2500, 3500)
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 1999 Chevrolet Silverado (1500, 2500, 3500)
GENERAL MOTORS TRUCK & VAN KEY FOB REMOTE STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS
Minutes 5 minutes
-
Locate DLP
LOCATE the Data Link Port (shown above) located under the Driver’s side dashboard. IDENTIFY ports 8 and 4 using the diagram. CONFIRM that there are metal pins inside both ports.
-
Jump DLP – Enter Programming Mode
JUMP ports 8 and 4 using a suitable ground wire (paperclip). LEAVE the wire connected throughout the programming procedure. The Vehicle will respond by cycling the door locks LOCK / UNLOCK to indicate successful entry into Programming Mode.
-
Program Remote(s)
PRESS and HOLD both the LOCK and UNLOCK buttons on the first remote to be programmed. WAIT 15 seconds until the Vehicle responds by cycling the door locks LOCK / UNLOCK to signal successful programming of the remote. RELEASE the LOCK and UNLOCK buttons.
-
Program Additional Remote(s)
REPEAT Step 3 for any additional remotes to be programmed, including working ones.
-
Exit Programming Mode
REMOVE the jumper wire connected to the Data Link Port to EXIT Programming Mode.
-
Test Remotes
TEST all remotes. Programming is complete.
-
Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Supply:
- Key Fob Remote(s) that you want to program to your vehicle.
Tools:
- Paperclip
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
- You may clear your keyless entry system memory by entering programming mode as shown in the steps above.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
1999 Chevrolet Silverado (1500, 2500, 3500)
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
I just wanted to say thank you. I had put off fixing this problem and simply used my keys to lock and unlock my vehicle. What a pleasure it is to have a remote key fob working again.
I have a 1999 chevy silverado i put in all new door lock actuators on all doors to be able to enter program mode. The new actuators fixed it not going into program mode now it does. But the remote wont link to the truck im stumped :(
I purchased a new remote to have a spare, but when I start the process of trying to get into program mode, my trucks locks don’t cycle. The locks so still work because when I’m driving and go over a certain speed they automatically lock. Any ideas? Thanks.
I bought two of the replacement remotes but have never been able to program them. My truck is a 1999 Silverado. I’m not sure how to get this done but I tried he method of inserting the key and holding down the unlock button but I’m not sure of how to get to the point where instructed to stop. Could someone give me some advice please?
I purchase two new remotes for my 99 Silverado. I followed the instructions on your page but, my DLP does not have a wire on the number four link. I found another set of directions online and it said to hold the unlock button down cycle the ignition switch two times then release the unlock button and the system should go into programming mode. Mind did all that but, the remotes would not program….
My dlp port does not have a wire in port 8 on my 1999 silverado